Since I've started sewing knits, I've made my son plenty of raglans. I'd wanted to give my husband a similar gift, but he's harder to please than my son is, and pickier about fit. That said, my shelves were starting to get full of fabric FOR father/son sets, and it became obvious that if I wanted to buy MORE fabric for Father/Son sets (which I always do) I was going to have to take the plunge.
Enter this gorgeous stormtrooper print. This particular fabric host will occasionally pass along savings to her customers by screen printing designs, so this cost about 30% less than your typical custom print. Which made it a prime candidate for an "experimental" set of shirts.
For my 3-year old son, I used the Max & Meena Max Raglan (size 4/5). And for my husband, I used the Cole's Creations Jerry Raglan, size 44. I fussycut a little bit on my husband (and a lot on my son) to get the stormtroopers front & center, but I'm glad I did. Both shirts fit great, and my son in particular was excited to have a stormtrooper shirt.
And I even have a little fabric left over for a another shirt as my son grows! Once I was all done, I remembered the R2D2 Raglan I had made for myself, with fabric from the same supplier. Sadly I could not convince my daughter to put on her "Rebel Princess" dress for a full-family shot, but here the rest of us are in our Star-wars Themed Raglans.
Stay tuned, because clearly, my daughter needs an R2D2 Raglan too!
Tuesday, June 18, 2019
Tuesday, June 11, 2019
There's no Place like Complete (A Decade of Oz)
It's been a long road, but my Oz set for my MIL is finally done!
I started this set in 2009 - The Good Witch/Bad Witch Panel was actually one of my first quilt-shop purchases, EVER. My husband and I were just dating at the time, but I knew his mom had an Oz obsession, and that pillows would be a fun gift.
Little did I know that over time, Quilting Treasures would release six of these panels. There was a Sepia Beginning, some Good Witch/Bad Witch, the Yellow Brick Road, the Emerald City/Great Oz, Scenes from the Witch's Castle, and finally a No Place like Home panel. By the time the final panel rolled around, my (soon-to-be) husband was fully trained to go into the quilt shop and pick up the panels himself on the way home from work.
Also sometime early on, it occurred to me that since the panels came with a "reel" of scenes from the movie at the bottom, and I was collecting the whole set anyway, I had everything I needed to make a storyboard quilt. So in 2011 (our wedding year), I cut into the fabric and over the next 3 years I put together this beauty. It became my first-ever Quilt-Show Quilt in Central Oklahoma Quilter's Guild Quilt Show in 2013 (Display only, since I did the piecing myself and sent it out to be quilted). I finished the dedication on the back (not pictured) and gifted it to my MIL in 2014. To date, it remains my most ambitious project.
But... back to present day! After gifting the quilt (and birthing my daughter) I have to admit that the pillow-making slowed to a trickle. In fact, I think the final set of pillows was up on my design board for close to three years before my MIL finally asked me if I was still planning on completing it. But complete it I did!
The final "No Place Like Home" pillow wasn't gifted until May 2019, making this Oz set reflect a full decade's worth of learning and progress. Early pillows were quilted with the walking foot, but although I haven't free-motion quilted in a while, I found it was like riding a bicycle when I brought the final pillow out.
And My MIL is thrilled! At her new place in Oklahoma she has an entire guest bedroom dedicated to Wizard of Oz memorabilia, and on display front and center is her quilt and pillow set. Her "Pride and Joy", she calls it, and shows it off to anyone who comes to visit.
All in all, I'm pretty proud of it - it's a big accomplishment, and I know this whole set is in a place where it is cherished and loved. And what more could a quilter/sewist want for her creations?
I started this set in 2009 - The Good Witch/Bad Witch Panel was actually one of my first quilt-shop purchases, EVER. My husband and I were just dating at the time, but I knew his mom had an Oz obsession, and that pillows would be a fun gift.
Little did I know that over time, Quilting Treasures would release six of these panels. There was a Sepia Beginning, some Good Witch/Bad Witch, the Yellow Brick Road, the Emerald City/Great Oz, Scenes from the Witch's Castle, and finally a No Place like Home panel. By the time the final panel rolled around, my (soon-to-be) husband was fully trained to go into the quilt shop and pick up the panels himself on the way home from work.
Also sometime early on, it occurred to me that since the panels came with a "reel" of scenes from the movie at the bottom, and I was collecting the whole set anyway, I had everything I needed to make a storyboard quilt. So in 2011 (our wedding year), I cut into the fabric and over the next 3 years I put together this beauty. It became my first-ever Quilt-Show Quilt in Central Oklahoma Quilter's Guild Quilt Show in 2013 (Display only, since I did the piecing myself and sent it out to be quilted). I finished the dedication on the back (not pictured) and gifted it to my MIL in 2014. To date, it remains my most ambitious project.
But... back to present day! After gifting the quilt (and birthing my daughter) I have to admit that the pillow-making slowed to a trickle. In fact, I think the final set of pillows was up on my design board for close to three years before my MIL finally asked me if I was still planning on completing it. But complete it I did!
The final "No Place Like Home" pillow wasn't gifted until May 2019, making this Oz set reflect a full decade's worth of learning and progress. Early pillows were quilted with the walking foot, but although I haven't free-motion quilted in a while, I found it was like riding a bicycle when I brought the final pillow out.
And My MIL is thrilled! At her new place in Oklahoma she has an entire guest bedroom dedicated to Wizard of Oz memorabilia, and on display front and center is her quilt and pillow set. Her "Pride and Joy", she calls it, and shows it off to anyone who comes to visit.
All in all, I'm pretty proud of it - it's a big accomplishment, and I know this whole set is in a place where it is cherished and loved. And what more could a quilter/sewist want for her creations?
Tuesday, May 7, 2019
Surprise Doll Sundress
It seems we have a burgeoning fashionista in the house. In January my daughter saw this fabric being offered by one of my favorite hosts, and fell in love.
When the fabric got here in March, I downloaded the coloring pages from Ellie and Mac, and then used MS Paint to reduce them until several of them could fit on one page. My daughter told me she wanted an "off the shoulder dress, like Sleeping Beauty," from this fabric so I delved into my pattern files (yes, I own almost all of these already; no I haven't sewn a single one) and sketched out the pattern views most likely to fit the bill. This is what I came up with:
I showed these to my daughter, and she picked the Midsummer Dream by Striped Swallow Designs.
My execution on the waistband ended up a little shaky: the Aurora is designed for negative ease, the Midsummer's dream is not, so my waistbanded ended up a little bulky. I also underestimated how much ease I would want *above* the waistband when I calculated total length.
But although this dress doesn't meet *my* exacting standards, my daughter is thrilled. She picked the fabric, she chose the concept, and she loves the final product.
I mean, seriously; just look at the smile on that face! She loves that she can adjust the upper flounce up and down, she loves that it twirls, and she loves the fact that it has most of her favorite LOL dolls on it.
Oh, and one final entertaining bit about this dress; by pure happenstance, the flounce and the bodice line up to give one doll a color change halfway through. If it'd been an actual seam that lined up like that, I would have purchased a lotto ticket that day. But for a lucky flounce, I'll just settle for showing pictures of my good fortune online!
So, for a dress that had a few flaws in the execution, it still ended up making not one, but two people happy overall. What a nice surprise!
Friday, May 3, 2019
Pokemon Part II
Along with my Pokemon panel, I also scored a few scraps of Pokemon fabric - a gorgeous, hard-to-find print that goes for a small fortune online. Once I saw it I knew my SIL would love it though, and so I set about figuring out how I could use it for my nephew.
Once again, the Brindille & Twig Kimono came to the rescue. My SIL had admired the built-in gloves on the WoW Kimono, and through careful measuring, I discovered I had *just enough* fabric to make it work with these scraps. Seriously; When all was said and done, this was the total summation of scraps I had left:
And though the B&T pattern still isn't something I tend to recommend for beginners, I have found ways to make it work for me. And I am pleased with the result!
From back to front, this Kimono is colorful and fun, and putting those little contrast feet on the footie pants is getting kind of addictive. If I'd had enough, I would have made these leggings out of the same fabric, but alas! The pops of color I did manage to incorporate are still fun.
And the look even better when paired with the pokemon blanket.
I gave this gift set to my SIL shortly after my nephew was born, and although my nephew is still a little small for the Kimono, the blanket is getting lots of love.
Here are my kids showing off the kimono during my rushed photography session (does everyone else photograph their stuff right before it heads out the door?).
And here is the full gift set I gave my BIL & SIL upon the birth of their new baby. A blanket, a trial "snuggly", and a brand new outfit for baby. Here's hoping they all get lots of love and use!
Once again, the Brindille & Twig Kimono came to the rescue. My SIL had admired the built-in gloves on the WoW Kimono, and through careful measuring, I discovered I had *just enough* fabric to make it work with these scraps. Seriously; When all was said and done, this was the total summation of scraps I had left:
And though the B&T pattern still isn't something I tend to recommend for beginners, I have found ways to make it work for me. And I am pleased with the result!
From back to front, this Kimono is colorful and fun, and putting those little contrast feet on the footie pants is getting kind of addictive. If I'd had enough, I would have made these leggings out of the same fabric, but alas! The pops of color I did manage to incorporate are still fun.
And the look even better when paired with the pokemon blanket.
I gave this gift set to my SIL shortly after my nephew was born, and although my nephew is still a little small for the Kimono, the blanket is getting lots of love.
Here are my kids showing off the kimono during my rushed photography session (does everyone else photograph their stuff right before it heads out the door?).
And here is the full gift set I gave my BIL & SIL upon the birth of their new baby. A blanket, a trial "snuggly", and a brand new outfit for baby. Here's hoping they all get lots of love and use!
Tuesday, April 30, 2019
Pokemon Part I
As "the Cool Aunt," my SIL loved to play Pokemon Go with my kids. Now that she's a mom, I wanted to gift of those memories back to her own child. One of my favorite fabric hosts has a really active Buy/Sell/Trade page, and one day on a lark, I offered up a panel I wasn't planning to use in exchange for one I might.
This led to the acquisition of a fun "Gotta Catch Em All" panel. I haven't quilted in years, but I figured a blanket might be a fun gift to give back. Of course the panel only came in Cotton Lycra, but people online assured me that I could back C/L with Minky, and it would be "fine".
In practice... not everything you read on the internet is true. After a teeny trial run that turned out mostly OK, I found that some problems (like fabric spread) scale up just fine. My first make of the blanket grew as I stitched it until the sides took on a not-so-lovely clamshell appearance - and after several hours of stitch removal, ultimately I was forced to simply cut the area off and try again. I didn't take pictures of this process, because I was in "heavy troublehooting mode" at the time, but it turned a one-night project into a 1.5-week drama.
That said, the end result did work out, mostly:
The second time I got smarter about lengthening my stitch length. I also hand stitched the blanket closed rather than relying on topstitching close to the edge I'd left open for turning. Topstitching through only 2 layers of fabric rather than 4 made a really big difference, and if I ever get brave/foolish enough to sewing with minky again, that's what I'm going to do the first time around.
Emphasis on if, mind you.
In the end, I think this will be a blanket loved for the beauty of the artwork, and appreciated for the time I spent identifying just the right fabric for my nephew. The craftsmanship is... not as elegant as I would have liked, but some projects are meant to be loved, not displayed. And with the bright colors and soft backing, this one is being loved for sure.
This led to the acquisition of a fun "Gotta Catch Em All" panel. I haven't quilted in years, but I figured a blanket might be a fun gift to give back. Of course the panel only came in Cotton Lycra, but people online assured me that I could back C/L with Minky, and it would be "fine".
In practice... not everything you read on the internet is true. After a teeny trial run that turned out mostly OK, I found that some problems (like fabric spread) scale up just fine. My first make of the blanket grew as I stitched it until the sides took on a not-so-lovely clamshell appearance - and after several hours of stitch removal, ultimately I was forced to simply cut the area off and try again. I didn't take pictures of this process, because I was in "heavy troublehooting mode" at the time, but it turned a one-night project into a 1.5-week drama.
That said, the end result did work out, mostly:
The second time I got smarter about lengthening my stitch length. I also hand stitched the blanket closed rather than relying on topstitching close to the edge I'd left open for turning. Topstitching through only 2 layers of fabric rather than 4 made a really big difference, and if I ever get brave/foolish enough to sewing with minky again, that's what I'm going to do the first time around.
Emphasis on if, mind you.
In the end, I think this will be a blanket loved for the beauty of the artwork, and appreciated for the time I spent identifying just the right fabric for my nephew. The craftsmanship is... not as elegant as I would have liked, but some projects are meant to be loved, not displayed. And with the bright colors and soft backing, this one is being loved for sure.
Tuesday, April 23, 2019
A Little Helper
After seeing me at the sewing machine so often over Christmas, my 6-year-old daughter A started asking me when I was going to let *her* sew a dress. A dress seems like a bit much to start with, but after some cajoling by her - and some critical thinking by me - I came up with an idea for a skirt that she could make.
I designed this skirt for a 1" hem on bottom and an elastic casing on top. Since my daughter has a 22" waist and I have a stash of 45" wide fabric, it was easy to decide on a 2x gather for the skirt. Being me, I added pockets borrowed from the SLPCo Isla because why not, but the design would work just as well without them.
My daughter was given access to my quilting stash (which, I confess is less sacred than it used to be now that I do more knits), and she selected a fun pink leaf print from my LQS. She waited patiently while I cut and ironed the right creases in it. Then she got to work!
I handled all the ironing and cutting, but she helped me put the pins in, and she managed the fabric (with help) as it went through the machine. Her main job was to pull the pins out as we sewed, and by the end it was a job she performed with gusto. We sewed the pockets to the skirt front/back, then we sewed the sides of the skirt together, and finally we hemmed it and made the casing
And once I put the elastic in, she was thrilled with the result! She's still a dress person so this skirt doesn't get *quite* as much action, but she wore it to church the next day to show all her friends, and then *again* to school to show her teacher on Monday.
and now I have a quick-make project to do with her. It seems the next generation of sewists is in the works!
I designed this skirt for a 1" hem on bottom and an elastic casing on top. Since my daughter has a 22" waist and I have a stash of 45" wide fabric, it was easy to decide on a 2x gather for the skirt. Being me, I added pockets borrowed from the SLPCo Isla because why not, but the design would work just as well without them.
My daughter was given access to my quilting stash (which, I confess is less sacred than it used to be now that I do more knits), and she selected a fun pink leaf print from my LQS. She waited patiently while I cut and ironed the right creases in it. Then she got to work!
I handled all the ironing and cutting, but she helped me put the pins in, and she managed the fabric (with help) as it went through the machine. Her main job was to pull the pins out as we sewed, and by the end it was a job she performed with gusto. We sewed the pockets to the skirt front/back, then we sewed the sides of the skirt together, and finally we hemmed it and made the casing
And once I put the elastic in, she was thrilled with the result! She's still a dress person so this skirt doesn't get *quite* as much action, but she wore it to church the next day to show all her friends, and then *again* to school to show her teacher on Monday.
and now I have a quick-make project to do with her. It seems the next generation of sewists is in the works!
Tuesday, April 16, 2019
Happiest Place Dress
It'd been a while since I made something nice for my aspiring PA friend, but when she told me she and her family were taking a trip to Disney World, inspiration hit. I'd recently seen a preorder for some "Happiest Place" Balloons - which I adored - and my friend's kiddo has a taste for classic A-line dresses.
So, I indulged.
The Peek-a-Boo Patterns Violet is one of my go-to "quick makes," and I love the way it can simultaneously showcase, tone down, and conserve a colorful custom print. Now that I insist on topstitching, serging to close seams, and using a double needle on the collar and hems, I'll admit it's a little LESS fast than it used to be. But it's still an easy make with a classic silhouette that I knew my friend and her daughter would love.
And love it she did! She wore this the day she traveled out to Disney world, and I got pictures of her wearing showing it off at the resort. Sounds like a fun way to get excited for the trip, and a fun souvenir to bring home!
So, I indulged.
The Peek-a-Boo Patterns Violet is one of my go-to "quick makes," and I love the way it can simultaneously showcase, tone down, and conserve a colorful custom print. Now that I insist on topstitching, serging to close seams, and using a double needle on the collar and hems, I'll admit it's a little LESS fast than it used to be. But it's still an easy make with a classic silhouette that I knew my friend and her daughter would love.
And love it she did! She wore this the day she traveled out to Disney world, and I got pictures of her wearing showing it off at the resort. Sounds like a fun way to get excited for the trip, and a fun souvenir to bring home!
Subscribe to:
Posts (Atom)



































